Is your washing machine acting? Is it full of water and not draining properly? If yes, you don’t need to panic. That sounds like a common problem and you can get it fixed at Vancity Appliance Service.

Here, we fix washers fast with our effective Washer Repair Burnaby services. if it not draining, we can help with that.

Here are some easy things you can check before calling a repair expert.

1. Check the Drain Hose

Very firstly, you need to check drain hose- it is the pipe which carries water out of your washer. In cases where it is bent or blocked, water cannot drain properly. Here’s how you can fix it:

  • Unplug the washer.

  • Pull out the drain hose from the back.

  • Look inside for lint, dirt, or small items stuck inside.

  • If the hose is dirty, clean it out with water.

  • Make sure the hose is not twisted or bent.

In case the hose is clear but water is still not draining, you need to proceed for next step.

2. Clean the Pump Filter

Most of the washers come with a pump filter which catches small objects like lint, coins, or hair. In case this gets clogged, your washer will not drain properly. Here’s how you need to clean it under Dishwasher Repair Surrey:

  • Find the filter (it’s usually at the bottom front of the washer).

  • Put a towel on the floor to catch water.

  • Open the filter cover and remove any dirt or small objects.

  • Rinse the filter and put it back.

Cleaning this filter once a month can help prevent drainage problems.

3. Check the Drain Pump

Drain pump is known for moving water out of your washer. In case it blocked or broken, your washer will not drain and then you will need to:

  • Remove the back cover of your washer.

  • Look inside the pump for small items like socks, buttons, or coins.

  • If something is stuck, take it out.

  • If the pump makes a loud noise, it may need to be replaced.

Not sure how to fix the pump? Call Vancity Appliance Service for professional for Dishwasher Repair Surrey!

4. Check the Washer Door or Lid

If your washer’s door or lid doesn’t close properly; it can stop draining. And here’s how you need to fix it:

  • Open and close the door firmly.

  • If your washer still won’t drain, the lid switch or door lock might be broken.

You may need Vancouver Washer Repair if the washer doesn’t start draining.

5. Check the Drain Line

Most of the time, the problem is not with the washer but with the drain pipe of your home. here’s how you fix it:

  • Remove the drain hose and see if water flows freely.

  • If the pipe is clogged, use a drain cleaner.

  • Make sure the hose is at the right height (not too high or low).

A blocked drain pipe can stop your washer from draining, so checking this can help!

When to Call Vancity Appliance Service

If you’ve tried these fixes and your washer still won’t drain, it’s time to call the experts. If you need reliable Washer Repair Burnaby services, Vancity Appliance Service is your destination. Here’s why we are the best:

  • Quick and easy washer repair in Burnaby

  • Same-day and emergency service available

  • Affordable pricing with no hidden fees

  • 100% customer satisfaction guaranteed

Keep Your Washer Running Smoothly!

When a washer is not draining, it can cause a big problem but then, a lot of issues can be fixed easily. If you need help, Vancity Appliance Service is right here for you with our Vancouver Washer Repair!

Need fast and expert appliance repair? Contact us today!